Meters

Water meters

 

Vertikalus-skaitiklis-1

Horizontalus-skaitiklis-1

Nominal flow m3/h

Minimal flow

Installation

Maximum presure

Cold water temperature

Hot water temperature

Output signals

1,6     2,5

3 l/h     4 l/h

vertical and horizontal

16 bar

0,1-30 oC

30-90 oC

M-bus or impulse

 

Have a question?

Make request
  1. Name:(*)
    Enter your full name
  2. Email:(*)
    Enter your email.
  3. Phone:(*)
    Enter phone
  4. Message:(*)
    Please leave the message
  5. Confirmation code:(*)
    Confirmation code:
    Neteisingai įvestas kodas
  6.   

 

Energy Meters

 

PMAC615 Single Phase Digital Panel Meter

PMAC615
  • Measuring Current Range: 0-5A
  • Measuring Voltage Range: 0-220V
  • Accuracy Class: current/ voltage: 0,5%, energy: 1,0%
  • Operating Temperature: -20 ~ +60 oC
  • Dimensions: 110x65 mm
  • Rated current: 1 A or 5 A
  • Rated voltage: 220 VAC
  • Frequency: 50 or 60 Hz
  • Overload: 120% of rating
  • Relay output: 2 DO
  • Node capacity: 220VAC/5A, 30VDC/5A
  • Communication: RS485/ Modbus
  • Power loss: <2VA
  • Standard: CE, IEC62053-21

 

PMAC727 Multifunction Power Meter

PMAC727
  • Measuring Current Range: 0~50.000 A
  • Measuring Voltage Range: 0~500 KV
  • Accuracy Class: 0,2 %
  • Operating Temperature: -20 ~ +70 oC
  • Dimensions: 96x96 mm
  • Power supply: 85~265VAC/ 45~65Hz, 100~ 300VDC
  • Power loss: <3VA
  • Input range: Current: AC 0~5 A
  • Frequency: 50/ 60 Hz
  • Overload capability: 120%
  • Harmonic analysis: 31st odd component for voltage/current
  • Communication: RS485 port/ Modbus protocol
  • Baud rate: 4800/ 9600/ 19200/ 38400 bps
  • Standard: IEC62053-21/23, CE

 

PMAC901 Single Phase Din-rail Energy Meter

PMAC903 Three Phase Din-rail Energy Meter

PMAC901-903
  • Phase: Single Phase; Three Phase
  • Measuring Energy Range: 0-999999,9 KWH
  • Accuracy Class: class 1
  • Output Voltage: 220/380 V
  • Operating Temperature: -20 ~ +55 oC
  • Frequency: 50/ 60 Hz
  • Communication: RS485 port/ Modbus protocol
  • Standard: IEC62053-21/22/23, CE, KEMA

 

PMAC760 Intelligent Power Quality Analyzer

PMAC760
  • Measuring Current Range: 0~49.999 A
  • Measuring Voltage Range: 0~50.000 V
  • Accuracy Class: 0,2%
  • Operating Temperature: -20 ~ +60 oC
  • Dimensions: 96 x 96mm
  • Metering True RMS, 1 sec refresh time
  • Overload: 120% of rated
  • Status input: 4 channels
  • Relay output: 4 channels
  • IP index: IP54 (front panel) and IP20 (case)
  • Harmonic analysis: 2-63rd harmonic
  • Power frequency withstand voltage: AC 2KV/minute
  • Power supply: 85~265VAC, 80~300 VDC
  • Power loss: <10 VA
  • Communication: Ethernet communication port, 10M, UDP/ TCP Server/ TCP Client, USB 2.0
  • Standard: IEC62053-21/23, CE

 

Have a question?

Make request
  1. Name:(*)
    Enter your full name
  2. Email:(*)
    Enter your email.
  3. Phone:(*)
    Enter phone
  4. Message:(*)
    Please leave the message
  5. Confirmation code:(*)
    Confirmation code:
    Neteisingai įvestas kodas
  6.   

 

Steam flow meter

 

  • STEAM, GAS, LIQUID
  • With IP65 local LCD display (Remote version IP67)
  • +/- 1% Accuracy Liquid
  • +/- 1.5% Accuracy Gas
  • Wafer fit design
  • For pipes from DN15 to DN1200 (15mm - 1200 mm)
  • 304 Stainless steel construction
  • 24 VDC and/or 3.6v Lithium Battery Powered (5yr Life)
  • Output Signal: Pulse, 4-20mA, Hart, Modbus RS485
  • Temp Range: -40 - 250 oC (Standard); +100 - 350 oC (Exteneded range)
  • Pressure: 16 bar (Standard); 40 or 60 bar (on request)
garo_matuoklis

 

Meters

 

Water meters

vertical and horizontal

Heat meters

measure the consumption of heat energy

Energy meters

single, three phase, multifunction

Steam meter

Steam flow meter

Heat meters

Heat meters are designed to measure the consumption of heat energy being supplied to a system or taken from it with heat power from 100 W to 100 MW where heat medium is water.

Silumos-skaitikliai2

Heat meter consists of:

  • calculator,
  • flow transducer with pulse transmitter,
  • temperature sensors of type Pt 500. 

Heat meters in this configuration can be used in the same time to measure the consumption of cooling energy in rooms with air conditioning.

We have a range of heat meters to suit various needs and demands:

  • Wall Mounted,
  • Mounted Compact,
  • Ultrasonic Meters.
skaitiklis3

 

There is a possibility to connect heat meters in a network. Possibility to connect additional meters as:

  • water meter,
  • gas meter,
  • electric energy meter,
  • provided that they have a pulse output.

Heat meter can be read by different interfaces as:

  • RS 232,
  • RS 485,
  • M-Bus,
  • Lon Works.

Overview:

  • MID Approved,
  • BMS output,
  • Pulsed output [Kw/hr], M-bus or 4-20mA versions,
  • Dn 15-300 applications,
  • Battery [6 year life] or 230v AC versions,
  • IP54 protection rating,
  • EMC Class C according to EN1434,
  • Measurement range 5-150°C,
  • Ambient temperature: 0 - 55°C,
  • Temperature resolution: 0.01°C,
  • Measuring frequency 20 - 120 seconds,
  • Selectable annual billing date,
  • No data loss when battery removed,
  • PT500 sensors,
  • Optional version with two pulsed inputs available.

 

Have a question?

Make request
  1. Name:(*)
    Enter your full name
  2. Email:(*)
    Enter your email.
  3. Phone:(*)
    Enter phone
  4. Message:(*)
    Please leave the message
  5. Confirmation code:(*)
    Confirmation code:
    Neteisingai įvestas kodas
  6.